Dakota 2WD V8-4.7L Flex Fuel (2009)
6. Raise and support the vehicle.
7. Route the cable (5) through the underbody bracket and seat the cable end fitting in the bracket.
8. Connect the cable (1) to the cable adjuster (4).
9. Perform the park brake adjustment procedure, See: Adjustments.
10. Lower the vehicle.
Rear Cable
REAR PARK BRAKE CABLE
1. Push each cable end through the brake cable support plate hole (2) until the cable end fitting tabs lock into place. NOTE: Pull on the cable to
ensure it is locked into place.
2. Install the rear cables (1) into the park brake lever behind the rear of the brake assembly (3).