Dakota 2WD V8-4.7L Flex Fuel (2009)
CAUTION: Do not reuse the original stop lamp switch. Anytime a switch has been removed or its position compromised, a new switch must be
installed and adjusted. Do not attempt to readjust the switch.
4. Install and adjust a NEW stop lamp switch. See: Lighting and Horns/Brake Light Switch/Service and Repair/Stop Lamp Switch - Installation.
5. Install booster push rod (3) on brake pedal and install clip (1). See: Brake Pedal Assy/Service and Repair/Brake and/or Accelerator Pedals -
Installation.
6. Connect vacuum hose to check valve (6).
7. Install master cylinder (4). See: Hydraulic System/Brake Master Cylinder/Service and Repair/Removal and Replacement/Brake Master Cylinder -
Installation.
8. Fill and bleed brake system. See: Brake Bleeding/Service and Repair.