Dakota 2WD V8-4.7L Flex Fuel (2009)
Control Assembly: Description and Operation
DESCRIPTION
The A/C-heater control (1) for the manual temperature control (MTC) single zone heating-A/C system allows one temperature setting for the entire
vehicle. All controls are identified by ISO graphic symbols.
The A/C-heater control and integral computer is located in the instrument panel and contains:
-
a push button A/C ON/OFF control (2). The Snowflake button contains an LED that illuminates when the A/C system is in operation.
-
a push button rear window defogger on/off control (3). The defogger button contains an LED that illuminates when the rear window defogger
(EBL) system is in operation.
-
a rotary control knob for recirculation and mode control of the discharged air (4).
-
a rotary control knob for temperature control of the discharged air (5).
-
a rotary control knob for fan speed selection and turning the heating-A/C system off (6).
The A/C-heater control cannot be repaired or adjusted and must be replaced if inoperative or damaged. The illumination lamps for the A/C-heater
control are available for service replacement.
