Dakota 2WD V8-4.7L Flex Fuel (2009)
4. Install the two front battery tray bolts hand tight.
5. Raise the vehicle on a hoist, See: Maintenance/Vehicle Lifting/Service and Repair
NOTE: The middle bolt hole is to remain open for a front fender liner fastener (1).
6. Install the two lower battery tray bolts (2). Tighten the bolts to 10 Nm (90 in. lbs.).
7. Install the left front fender liner, See: Body and Frame/Spoilers, Flaps, and Air Dams/Mud Flap/Service and Repair/Splash Shield - Installation.
8. Lower the vehicle.
9. Tighten the upper battery tray bolts to 10 Nm (90 in. lbs.).