Dakota 2WD V8-4.7L Flex Fuel (2009)
Keyless Start Antenna: Service and Repair
Remote Start Antenna - Removal
REMOVAL
The Remote Start Antenna Module Assembly consists of an electrical connection to the WCM/SKREEM (1), a length of coax cable (2), two mounting
clips (3) and (4), and a control module/antenna (5).
The control module (3) is located under the instrument panel cover (2). The module electrical connector plugs into the WCM/SKREEM at the right side
of the steering column.
1. Disconnect and isolate negative battery cable.
2. Remove steering column trim panel (knee blocker).
3. Remove steering column shrouds.
4. Remove left instrument panel (IP) end cap.
5. Remove IP cluster bezel.
6. Remove IP cluster and its three connectors.
7. Remove left A-pillar trim.