Dakota 2WD V8-4.7L Flex Fuel (2009)
4. Reconnect the pressure hose (2) at the pump (4). Tighten the tube nut to 31 Nm (23 ft. lbs.).
5. Refill the power steering system,See: Service and Repair/Power Steering System Bleeding.
Return Hose - Gear to Cooler
RETURN HOSE - GEAR TO COOLER
1. Install the return hose to the vehicle.
2. Reconnect the return hose (6) at the cooler (1) with hose clamps.
3. Reconnect the return hose (6) at the gear (7). Tighten the tube nut to 37 Nm (27 ft. lbs.).
4. Route the return hose and secure.
5. Remove the support and lower the vehicle.
6. Refill the power steering system,See: Service and Repair/Power Steering System Bleeding.
Return Hose - Cooler to Reservoir
RETURN HOSE - COOLER TO RESERVOIR