Dakota 2WD V8-4.7L Flex Fuel (2009)
Power Steering Pump: Service and Repair
Power Steering Pump - Installation
INSTALLATION
1. Align the pump (4) with the mounting holes on the engine.
2. Install 3 pump mounting bolts through the pulley access holes (1). Tighten the bolts to 28 Nm (21 ft. lbs.).
3. Install the pressure hose (2) to the pump (4). Tighten the tube nut to 31 Nm (23 ft. lbs.).
4. Install reservoir return hose (3) to the reservoir (1).
5. Install the serpentine drive belt,See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and
Repair/Removal and Replacement/Serpentine Accessory Drive Belt - Installation.
6. Fill the power steering pump,See: Service and Repair/Power Steering System Bleeding.
