Dakota 2WD V8-4.7L Flex Fuel (2009)
![background image](/dodge/dakota_2wd/v8-4.7l_flex_fuel/Page-2084005.png)
3. Install the upper control arm (4) See: Service and Repair/Front Upper Control Arm - Installation.
4. Reset the vehicle ride height See: Alignment/Service and Repair.
5. Perform a wheel alignment See: Alignment/Service and Repair.
Front Lower Control Arm Shock Bushing - Installation
LOWER CONTROL ARM SHOCK BUSHING
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure
proper operation during the removal and installation process.
1. Install the new shock bushing (4) into the lower control arm (3) using tools C-4212F (Press) (1), 9653-3 (driver) (5), 9602 (Depth gauge) (2) the
depth gauge will automatically set the depth of the bushing (4) in the control arm (3).
2. Install the shock See: Suspension Strut / Shock Absorber/Service and Repair/Front Strut / Shock/Installation.