Dakota 2WD V8-4.7L Flex Fuel (2009)
7. Install bolts into two of the threaded holes in the companion flange 180° apart.
8. Position Holder 6719A against the companion flange and install a bolt and washer into one of the remaining threaded holes. Tighten the bolts so
the Holder 6719A is held to the flange.
9. Remove the pinion nut and washer.
10. Mark a line across the pinion shaft and flange for installation reference.
11. Remove companion flange (1) with Puller C-452 (2).
12. Remove pinion seal with seal puller.
Pinion Seal - Installation
INSTALLATION
1. Apply a light coating of gear lubricant on the lip of pinion seal.
2. Install new pinion seal with Installer C-4076-B (1) and Handle C-4735 (2).