dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Transmission and Drivetrain > < Engine Controls - Generic PCM Programming Procedure|Page 2939
Page 8
background image

NOTE:

Due to the PCM programming procedure, a DTC may be set in other modules (TCM, BCM, MIC, SKIM, etc.) within the vehicle, if so equipped.
Some DTC's may cause the MIL to illuminate. Check all modules using "ECU View" from the Home screen, record the DTC's, and erase these
DTC's prior to returning the vehicle to the customer. Erase any DTC's in the PCM only after all other modules have had their DTC's erased.

NOTE:

The following step is required by law.

14.

Type the necessary information on the "Authorized Modification Label p/n 04275086AB and attach near the VECI label (Fig. 1).

Transmission and Drivetrain > < Engine Controls - Generic PCM Programming Procedure|Page 2939