Dakota 2WD V8-4.7L VIN P Flex Fuel (2007)
1. Position the trim panel (3) and connect the inside handle actuator rod (9).
2. Connect the electrical connectors (6).
3. Lift the trim panel up and onto the lock rod (1) and attachment hooks (7).
4. Install the lower screws (6).
5. Install the screw (5) from the pull cup.
6. Install the screw (4) at the interior handle.
7. Position the close out panel (2) and seat the fastener clips fully.
8. Install the manual window crank handle (2), if equipped.
9. Connect battery negative cable.
Removal
REMOVAL