Dakota 2WD V8-4.7L VIN P Flex Fuel (2007)
Sunroof / Moonroof Motor: Removal and Replacement
Removal
REMOVAL
1. Remove headliner.
2. Disconnect the electrical connector (1).
3. Remove three motor assembly attaching screws (4) from bottom side of motor assembly (3) and remove motor assembly from the motor bracket
(2).
Installation
INSTALLATION
1. If sunroof was open when drive motor was removed, carefully move glass panel into closed position and remove glass panel.
2. Set lifter arm timing by manually sliding the mechanisms (1) in the track until timing holes in the trollies are aligned with the timing holes in the
lifter arm cams (2) and insert pins (3) into the mechanisms to hold mechanisms in closed position.