Dakota 2WD V8-4.7L VIN P Flex Fuel (2007)
Brake Pedal Assy: Service and Repair
Installation
INSTALLATION
1. Connect the front cable (4) to the arm on the pedal assembly (5).
2. Position the replacement pedal assembly (5) on the dash and cowl.
3. Install the bolt (7) & nuts (3) and tighten to 14 Nm (125 in. lbs.).
4. Tighten the front cable grommet (1) to the floor pan and the cable retainer, roll the carpet back.
5. Connect the wires (1) to the brake lamp switch.
6. Install the park brake release rod (6).