Dakota 2WD V8-4.7L VIN P Flex Fuel (2007)
Air Duct: Service and Repair
Instrument Panel Demister Duct
Removal
REMOVAL
WARNING: On vehicles equipped with airbags, disable the airbag system before attempting any steering wheel, steering column, or
instrument panel component diagnosis or service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the
airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system.
Failure to take the proper precautions could result in accidental airbag deployment and possible personal injury or death.
NOTE: Take the proper precautions to protect the front face of the instrument panel from cosmetic damage.
1. Remove the instrument panel and place it on a workbench.
2. Remove the instrument panel ducts.
3. Remove the screws that secure the passenger side demister duct (1) and the driver side demister duct (5) to the instrument panel and support
assembly (7).
4. Remove the ducts from the instrument panel and support assembly.
Installation
INSTALLATION