Dakota 2WD V8-4.7L VIN P Flex Fuel (2007)
Front Steering Knuckle: Service and Repair
Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the brake caliper, rotor, shield and ABS wheel speed sensor if equipped.
4. Remove the front halfshaft nut 4X4 only.
5. Remove the tie rod end nut (1).
6. Separate the tie rod (2) from the knuckle with puller C-3894-A (1).
CAUTION: When installing puller 8677 to separate the ball joint, be careful not to damage the ball joint seal.