Dakota 2WD V8-4.7L VIN P Flex Fuel (2007)
8. Remove the stabilizer link lower nut (5) and then separate the stabilizer link (1) from the lower control arm (6) to gain access to the lower shock
nut (3).
9. Remove the lower shock bolt (4) and nut (3).
10. Remove the shock (2).
Installation
INSTALLATION
NOTE: All suspension components should be tighten with the weight of the vehicle on them (curb height).
1. Install the upper part of the shock (2) into the frame bracket.
2. Install the upper shock module nuts (1). Tighten to 61 Nm (45 ft. lbs.).