Dakota 2WD V8-5.9L VIN Z LDC (2000)
Central Timer Module ( CTM ) High Option: Component Tests and General Diagnostics
Road Testing A Complaint Vehicle
ROAD TEST WARNINGS
Some complaints will require a test drive as part of the repair verification procedure. The purpose of the test drive is to try to duplicate the diagnostic
code or symptom condition.
CAUTION: Before road testing a vehicle, be sure that all components are reassembled. During the test drive, do not try to read the DRB III screen
while in motion. Do not hang the DRB III from the rear view mirror or operate it yourself. Have an assistant available to operate the DRB III.
Six Step Troubleshooting Procedure
SIX-STEP TROUBLESHOOTING PROCEDURE
Diagnosis is done in six basic steps:
1. Verification of complaint
2. Verification of any related symptoms
3. Symptom analysis
4. Problem isolation
5. Repair of isolated problem
6. Verification of proper operation
Vehicle Preparation For Testing
VEHICLE PREPARATION FOR TESTING
Make sure the vehicle being tested has a fully charged battery. If it does not, false diagnostic codes or error messages may occur.