Dakota 4WD V6-239 3.9L Magnum (1996)
Alternator: Service and Repair
1. Disconnect battery ground cable, then remove belt.
2. Remove pivot and mounting bolts, then position alternator for wire connection access.
3. Remove harness hold-down, battery terminal, ground terminal and two field terminal nuts.
4. Remove wire connectors, then remove alternator.
5. Reverse procedure to install, noting the following:
a. Torque mounting and pivot bolts to 30 ft. lbs.
b. On models equipped with serpentine belts, the belt must be routed correctly or water pump will rotate in wrong direction and engine will
overheat. See Serpentine Drive Belt in Engine/ Drive Belts.....