dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

PCM - Cold Engine Driveway Stall Condition|Page 63 > < Diagram Information and Instructions|Page 54
Page 1
background image

Powertrain Control Module: Customer Interest
PCM - Cold Engine Driveway Stall Condition

SUBJECT:

Cold Engine Driveway Dieout Vehicles With 3.9L Engine & Manual Transmission
NO.: 18-34-90

GROUP:

DRIVEABILITY

DATE:

Dec. 31, 1990

MODELS:

1989   (

AB)

RAM VAN/WAGON (RWD)

(AD)

RAM PICKUP/RAM CAB & CHASSIS/RAMCHARGER
POWER RAM CAB & CHASSIS

(AN)

DAKOTA/DAKOTA SPORT/DAKOTA CONVERTIBLE
DAKOTA CAB & CHASSIS

SYMPTON/CONDITION:

Vehicle exhibits a cold engine start and stall (driveway dieout) condition.  This condition is only noticeable when ambient temperatures are in the 50~F
to 70~F (10~C to 20~C) range.

DIAGNOSIS:

Using the DRB II tester and the 1989 Powertrain Diagnostic manual for 3.9/5.2/5.9L EFI (Publication # 81-699-9012), verify that all vehicle systems are
functioning as designed. Be sure to check minimum idle air flow and that EGR is not applied at idle. If all systems are functioning correctly, proceed
with the following repair.

PARTS REQUIRED:

1

Single Module Engine Controller (SMEC/SBEC)

1989 3.9L Engine with Manual Transmission

AN, Federal

PN 4638250

AN, California

PN 4638240

AB, Federal

PN 4638245

AB, California

PN 4638230

AD, Federal

PN 4638247

AD, California

PN 4638249

1

Authorized Modification Label

PN 4275086

REPAIR PROCEDURE:

This repair involves the replacement of the original engine controller with a revised unit.

1.

Replace the engine controller (SMEC/SBEC) with the appropriate unit as called out in PARTS REQUIRED.

Figure 1

PCM - Cold Engine Driveway Stall Condition|Page 63 > < Diagram Information and Instructions|Page 54