Dakota 4WD V6-3.7L (2008)
Cabin Ventilation Grille: Service and Repair
Installation
INSTALLATION
1. Position the bottom edge of the body vent (1) to the bottom flange of the opening in the sheet metal. Applying even pressure, roll the vent upward
and engage the four locking tabs that secure the vent to the sheet metal. Verify that all four of the locking tabs lock on to the sheet metal.
NOTE: Cab back trim panel for Quad Cab models shown. Club Cab similar.
2. Install the cab back trim panel, See: Interior Moulding / Trim/Trim Panel/Service and Repair/Cab Back Trim Panel - Installation.