Dakota 4WD V6-3.7L (2008)
15. Install the upper C-pillar trim panels, See: Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim Panel-Installation.
16. Position the seat belt turning loop and height adjuster (3) bracket to the mounting holes in the upper roof rail (1) and install the two screws (2) that
secure the bracket to the roof rail. Tighten the screws to 39 Nm (29 ft. lbs.).
17. Install the upper door striker trim covers (3) as follows:
-
Position the trim cover (3) to the headliner (2) opening around the door striker and engage the retaining tabs that secure the cover to the roof
rail.
