Dakota 4WD V6-3.7L (2008)
NOTE: Cab back trim panel with jumper seats shown. Trim panel without seats similar.
1. Position the cab back trim panel (1) in the vehicle.
2. Using hand pressure, engage the clips (2) that secure the cab back trim panel to the cab.
3. Install the lower C-pillar trim panels, See: Pillar Trim/C-Pillar Trim Panel-Installation.
4. Install the upper C-pillar trim panels, See: Pillar Trim/C-Pillar Trim Panel-Installation.
Club Cab, With Rear Jumper Seats