Dakota 4WD V6-3.7L (2008)
NOTE: If the seal on the air door is deformed or damaged, the air door must be replaced.
16. Remove the panel-air door (1) from the opening located at the top of the HVAC housing (2).
17. Remove the three screws (1) that secure the floor distribution duct (2) to the bottom of the HVAC housing (3) and remove the duct.
NOTE: If any of the foam seals are deformed or damaged, the seal(s) must be replaced.
18. Remove the three foam seals (1 , 2 and 3) from the HVAC housing (4).
19. Remove the two metal clips (5) eleven screws (6) that secure the upper and lower HVAC housing halves together and separate the housing halves.