Dakota 4WD V6-3.7L (2008)
An exhaust gas routing tube (1) connects the EGR valve (4) to the intake manifold.
4. Remove two tube mounting bolts (2).
5. Remove tube (1) from solenoid (4). Slip opposite end of tube (6) from intake manifold.
6. Remove gasket (3) located between EGR valve solenoid and tube flange.
7. Disconnect electrical connector (3) at solenoid (1).
8. Remove two EGR valve solenoid mounting bolts (2).
9. Remove solenoid (1) from engine.