Dakota 4WD V6-3.7L (2008)
Drive/Propeller Shaft: Removal and Replacement
Removal
REMOVAL
1. With vehicle in neutral, position vehicle on hoist.
2. Remove skid plate if equipped.
3. Mark a reference line (3) across propeller shaft flange and pinion flange (2).
4. Remove exhaust crossover bolts from exhaust manifolds and lower crossover.
5. Remove boot clamp (3) from CV joint (1).
6. Remove propeller shaft (1) flange bolts (2).
7. Slide propeller shaft off the transfer case and remove shaft.
CAUTION: Failure to follow these instructions may result in a driveline vibration.
Installation
