Dakota 4WD V6-3.9L VIN X (1997)
are controlled through the wiper stalk switch. The intermittent portion of the wiper control is handled by the CTM through the intermittent wiper
relay. When the module detects a decrease in delay time as selected by the driver, an immediate wipe of the windshield takes place and the new
delay interval is implemented. This feature is present only on the Highline CTM.
hen the vehicle is moving at speeds at or below 10 mph, the delay time ranges from 1 to 36 seconds. When the speed rises above 10 mph, the
delay times are cut in half for a range of 1/2 to 18 seconds. The speed signal is provided to the CTM from the PCM over the CCD bus.
