Dakota 4WD V6-3.9L VIN X (1997)
door while lifting the panel upwards.
9. Pull the door trim panel away from the inner door far enough to access the power mirror switch wire harness connector.
Door Trim Panel Wire Harness Connectors
10. Unplug the power mirror switch wire harness connector.
11. Remove the power mirror switch from the back of the door trim panel.
12. When installing the power window and lock switch bezel to the door trim panel, insert the rear of the bezel into the trim panel opening, then push
down on the front of the bezel until the retaining tab snaps into place.
13. Reverse the remaining removal procedures to complete the installation.