Dakota 4WD V6-3.9L VIN X (1997)
6. Remove the passenger side airbag module from the upper airbag door flange and bracket on the instrument panel top cover.
7. When installing the passenger side airbag module, use only the correct rivets that are specified in the Chrysler Mopar Parts Catalog, or that are
supplied in the service package with the new airbag module and/or the new instrument panel top cover.
8. Remove the tape applied in Step 3 from the passenger side airbag module vents.
9. When reinstalling the instrument panel top cover, be certain that the airbag module wire harness connector latches are fully engaged.
10. Reverse the remaining removal procedures to complete the installation.
11. Do not connect the battery negative cable at this time. See Testing and Inspection/Procedures for the proper procedures.