Dakota 4WD V6-3.9L VIN X (1997)
Door Trim Panel Wire Harness Connectors
9. On the driver side only, if the vehicle is so equipped, unplug the power mirror switch wire harness connector.
10. If the vehicle is so equipped, unplug the Infinity upper door speaker wire harness connector.
11. Remove the door trim panel and set it aside.
12. Pull the door watershield away from the inner door panel.
13. Lower the door glass far enough to access the glass lift channel nuts.
Door Glass
14. Remove the nuts that secure the glass lift channel to the regulator arms.
15. Separate the glass and lift channel from the regulator arms.
16. Lift the glass to its fully-raised position and apply tape to secure the glass to the upper door frame.
Power Window Regulator Remove/Install
17. Unplug the power window motor wire harness connector.