Dakota 4WD V6-3.9L VIN X (1997)
NOTE:
IT MAY BE NECESSARY TO REMOVE THE LEFT COWL PLENUM SCREEN/GRILLE RETAINING PIN (PLASTIC RIVET) TO GAIN
ACCESS TO THE WINDSHIELD WASHER HOSE (FIGURE 2).
3.
To keep the windshield washer hose from contacting the wiper linkage, the hose must be secured to the third rib of the cowl plenum screen/grille
(Figure 3) by a tie strap.
4.
Insert a 6 to 8 in. BLACK tie strap through the screen/grille as shown in Figure 4.
5.
Using your fingers, loop the tie strap around the washer hose and the third rib of the cowl plenum screen/grille (Figure 4). Insert the end of the tie
strap into the strap retainer.