Dakota 4WD V8-4.7L (2009)
Turn Signal Bulb: Service and Repair
Front Lamp Unit Bulb - Installation
BULB - PARK/TURN SIGNAL/SIDE MARKER
CAUTION: Always use the correct bulb size and type for replacement. An incorrect bulb size or type may overheat and cause damage to the
lamp, the socket or the lamp wiring.
1. Align the base of the bulb with the park/turn signal/side marker bulb socket (3).
2. Push the bulb straight into the socket until the base is firmly seated.
3. Align the socket and bulb with the keyed opening on the back of the front lamp unit housing (1).
4. Insert the socket and bulb into the housing until the socket is firmly seated.
5. Rotate the socket clockwise about 30 degrees to lock it into place.
6. Reinstall the front lamp unit onto the front fender. See: Service and Repair/Front Lamp Unit - Installation.
7. Reconnect the battery negative cable.
