Dakota 4WD V8-4.7L Flex Fuel (2008)
3. Align the socket and bulb with the keyed opening on the back of the rear lamp unit housing (1).
4. Insert the socket and bulb into the housing until the socket is firmly seated.
5. Rotate the socket clockwise about 30 degrees to lock it into place.
6. Reconnect the wire harness connector (4) to the socket.
7. Reinstall the rear lamp unit onto the end of the quarter panel. See: Service and Repair/Removal and Replacement/Rear Lamp Unit - Installation.
8. Reconnect the battery negative cable.
