Dakota 4WD V8-4.7L VIN J (2007)
CAUTION: Do not allow the watershield or adhesive to become contaminated with dirt or other foreign substances.
Do not damage the watershield during removal and installation.
If the watershield becomes contaminated or damaged, replace the watershield.
6. Carefully remove the watershield from around the perimeter of the door.
7. Separate the watershield from the interior handle actuator rod and the door wire harness (if equipped) and remove the watershield.
Installation
INSTALLATION
CAUTION: Do not allow the watershield or adhesive to become contaminated with dirt or other foreign substances.
Do not damage the watershield during removal and installation.
If the watershield becomes contaminated or damaged, replace the watershield.
1. Position the wire harness and actuator rods through the holes in the watershield.
2. Secure the watershield to the inner door panel.
