Dakota 4WD V8-4.7L VIN J (2007)
Body / Frame Mount Bushing: Service and Repair
Installation
INSTALLATION
CAUTION: Whenever a body isolator bolt requires servicing or tightening, it is necessary to remove the bolt and install new thread locker compound
to the threads.
1. Install the isolators (2) rebound cushions (3), and bolts (4).
2. Install the front end sheet metal mounting isolators (1 & 6) and install the bolt (5).
3. Tighten the bolts to 81 Nm (60 ft. lbs.).
