Dakota 4WD V8-4.7L VIN J (2007)
3. Remove the seat belt turning loop from the C-pillar.
4. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the upper C-pillar trim panel (2) to the C-pillar and then pull the
trim panel away from the C-pillar and remove the trim panel.
Installation
INSTALLATION
Club Cab, Without Rear Jumper Seats
1.
CAUTION: Keep the inner bottom end of the upper C-pillar trim panel away from the cab back trim panel when installing the upper C-pillar
trim panel to prevent scratching the back trim panel.
Keeping the inner bottom end of the upper C-pillar trim panel (2) away from the cab back trim panel, slide the upper retaining tab (1) of the trim panel
into the hole in the C-pillar and engage the retaining tabs (3) that secure the trim panel to the C-pillar.
Club Cab, With Rear Jumper Seats
1.
CAUTION: Keep the inner bottom end of the upper C-pillar trim panel away from the cab back trim panel when installing the upper C-pillar
trim panel to prevent scratching the back trim panel.
