dodge Workshop Repair Guides

Dodge Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Radiator Support: Service and Repair
Radiator Upper Crossmember - Installation

INSTALLATION

1. Install upper crossmember.

2. Install outer mounting bolts and tighten.

3. Install nuts attaching latch to radiator crossmember support. Tighten nuts to 31 Nm (23 ft. lbs.) torque.

4. Check hood fit and adjust if required. Refer to Body and Frame / Specifications 

5. Install hood seal.

Body and Frame > Radiator Support > Component Information > Service and Repair > Radiator Upper Crossmember - Installation

< PREV PAGE NEXT PAGE >