Dakota 4WD V8-4.7L VIN J (2007)
Wheel Speed Sensor: Service and Repair
Sensor-Wheel Speed-Rear
Removal
REMOVAL
1. Raise vehicle on hoist.
2. Remove brake line mounting nut (4) and remove the brake line (3) from the sensor stud.
3. Remove the park brake cable (2) and bracket (1) from the sensor stud.
4. Disconnect the electrical connector (6).
5. Remove mounting stud (2) from the sensor (5).
6. Remove sensor (1) from differential housing (3).
Installation
INSTALLATION