Dakota 4WD V8-4.7L VIN J (2007)
-
No. 1 Upper piston ring.
8. Install the oil ring expander.
9. Install upper side rail (1) by placing one end between the piston ring groove and the expander ring. Hold end firmly and press down the portion to
be installed until side rail is in position. Repeat this step for the lower side rail.
10. Install No. 2 intermediate piston ring using a piston ring installer.
11. Install No. 1 upper piston ring using a piston ring installer.
12. Position piston ring end gaps as shown. It is important that expander ring gap (5) is at least 45° from the side rail gaps, but not on the piston pin
center or on the thrust direction.