Dakota 4WD V8-4.7L VIN J (2007)
1. Position the glove box lamp and switch (3) to the mounting hole in the instrument panel (2).
2. Reconnect the wire harness connector (1) to the lamp and switch.
3. Feed the wire harness back through the switch mounting hole.
4. Align the lamp and switch with the mounting hole in the instrument panel.
5. Using hand pressure, push the lamp and switch firmly and evenly into the mounting hole until it is fully seated.
6. Reinstall the glove box (4) into the instrument panel.
7. Reconnect the battery negative cable.