Dakota 4WD V8-4.7L VIN N (2000)
Engine-To-Body Ground Strap Remove/Install
3. Remove the screw that secures the left engine-to-body ground strap eyelet terminal to the rear of the left cylinder head.
4. On this engine only, remove the screw that secures the right engine-to-body ground strap eyelet terminal to the rear of the right cylinder head.
Engine-To-Body Ground Strap Remove/Install
5. Remove the nut and washer that secures the right engine-to-body ground strap eyelet terminal and the wire harness grounds to the weld stud on the
right front fender wheelhouse inner panel.