Dakota 4WD V8-4.7L VIN N (2000)
Control Assembly: Service and Repair
WARNING: ON VEHICLES EQUIPPED WITH AIR-BAGS, REFER TO AIRBAGS AND SEAT BELTS/AIRBAGS BEFORE
ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIR-BAG DEPLOYMENT AND POSSIBLE
PERSONAL INJURY.
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the cluster bezel from the instrument panel. Refer to Cluster Bezel in the Removal and Installation of Instrument Panel Systems for the
procedures.
Heater-A/C Control Remove/Install
3. Remove the four screws that secure the heater-A/C control to the instrument panel.
4. Pull the heater-A/C control assembly away from the instrument panel far enough to access the connections on the back of the control.