Service and Repair for Fuel Gauge Sender in 2000 Dakota 4WD V8-47L VIN N, 2-Door Models
Fuel Gauge Sender: Service and Repair
2-Door Models
Fuel Pump Module Components - 2 Door Models
The fuel gauge sending unit (fuel level sensor) and float assembly is located on the side of fuel pump module. The fuel pump module is located inside of
fuel tank.
REMOVAL
1. Remove fuel tank.
2. Remove fuel pump module.
3. Unplug 4-way electrical connector.
4. Disconnect 2 sending unit wires at 4-way connector. The locking collar of connector must be removed before wires can be released from
connector. Note location of wires within 4-way connector.