Dakota 4WD V8-4.7L VIN N (2000)
Idle Air Control (IAC) Motor: Service and Repair
The IAC motor is located on the throttle body.
REMOVAL
1. Remove air duct and air resonator box at throttle body.
Throttle Body And Sensor Connectors
2. Disconnect electrical connector from IAC motor.
Throttle Position Sensor
3. Remove two mounting bolts (screws).
4. Remove IAC motor from throttle body.
INSTALLATION
1. Install IAC motor to throttle body.
2. Install and tighten two mounting bolts (screws) to 7 Nm (60 in. lbs.) torque.
3. Install electrical connector.