Dakota 4WD V8-4.7L VIN N (2000)
2. Insert C-lock in end of axle shaft. Push axle shaft outward to seat C-lock in side gear.
3. Insert pinion shaft into differential case and through thrust washers and differential pinions.
4. Align hole in shaft with hole in the differential case and install lock screw with Loctite on the threads. Tighten lock screw to 11 Nm (8 ft. lbs.)
torque.
5. Install cover and add fluid. Refer to Lubricant Change procedure for procedure and lubricant requirements.
6. Install brake drum. Refer to Brakes and Traction Control, for proper procedures.
7. Install wheel and tire.
8. Lower vehicle.