Front Axle Pinion Nose Bracket Bolt Recall - TSB 889 (2000) - Page 4671
![background image](/dodge/dakota_4wd/v8-4.7l_vin_n/Page-1585003.png)
2.
Remove one of the front axle pinion nose bracket bolts (Figure 1).
3.
Install one of the provided bolts. Tighten the bolt to 85 ft-lbs (115 Nm).
4.
Remove the other front axle pinion nose bracket bolt (Figure 1).
5.
Install the provided bolt. Tighten the bolt 85 ft-lbs (115 Nm).
6.
Lower the vehicle.