Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
1. Position the bottom edge of the body vent (1) to the bottom flange of the opening in the sheet metal. Applying even pressure, roll the vent upward
and engage the four locking tabs that secure the vent to the sheet metal. Verify that all four of the locking tabs lock on to the sheet metal.
NOTE: Cab back trim panel for Quad Cab models shown. Club Cab similar.
2. Install the cab back trim panel.
Cab Back Trim Panel - Removal
REMOVAL
Club Cab, Without Rear Jumper Seats
1. Remove the upper C-pillar trim panels.
2. Remove the lower C-pillar trim panels.
