dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Defroster Grille|Page 7322 > < Defroster Grille|Page 7320
Page 1
background image

Air Duct: Service and Repair
Defroster Duct

Removal

REMOVAL

WARNING:  On vehicles equipped with airbags, disable the airbag system before attempting any steering wheel, steering column, or
instrument panel component diagnosis or service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the
airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system.
Failure to take the proper precautions could result in accidental airbag deployment and possible personal injury or death.

NOTE:  Take the proper precautions to protect the front face of the instrument panel from cosmetic damage.

1. Remove the instrument panel and place it on a workbench.

2. Remove the screws (1) that secure the defroster duct (2) to the instrument panel (3) and remove the duct.

Installation

INSTALLATION

1. Position the defroster duct (2) into the instrument panel (3).

2. Install the screws (1) that secure the defroster duct to the instrument panel. Tighten the screws to 2 Nm (17 in. lbs.).

3. Install the instrument panel.

Defroster Grille|Page 7322 > < Defroster Grille|Page 7320