Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
Evaporator Core: Service and Repair
Removal
REMOVAL
1. Remove the HVAC housing and place it on a workbench.
2. Disassemble the HVAC housing.
NOTE: Inspect the evaporator seal located in the upper half of the HVAC housing. If the seal is damaged or deformed, the seal must be replaced.
3. Carefully lift the A/C evaporator (1) out of the lower half of the HVAC housing (2).
NOTE: If the rubber flange around the evaporator tubes is deformed or damaged, the flange must be replaced.
4. If required, remove the rubber flange (3) from around the evaporator tubes (4).
