Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
Power Steering Line/Hose: Service and Repair
Installation
Return Hose - Gear To Cooler
RETURN HOSE - GEAR TO COOLER
1. Install the return hose to the vehicle.
2. Reconnect the return hose (6) at the cooler (1) with hose clamps.
3. Reconnect the return hose (6) at the gear (7). Tighten the tube nut to 37 Nm (27 ft. lbs.).
4. Route the return hose and secure.
5. Remove the support and lower the vehicle.
6. Refill the power steering system.
Return Hose - Without Cooler
RETURN HOSE - WITHOUT COOLER
1. Install the return hose to the vehicle.
2. Reconnect the return hose (4) at the reservoir (2).
3. Reconnect the return hose (4) at the gear (6). Tighten the tube nut to 37 Nm (27 ft. lbs.).
4. Route the return hose and secure.
5. Remove the support and lower the vehicle.
6. Refill the power steering system.
Pressure Hose