Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
Air Bag Deactivation Indicator: Service and Repair
Removal
REMOVAL
WARNING: To avoid serious or fatal injury on vehicles equipped with airbags, disable the supplemental restraint system before attempting
any steering wheel, steering column, airbag, seat belt tensioner, impact sensor, or instrument panel component diagnosis or service. Disconnect
and isolate the battery negative (ground) cable, then wait two minutes for the system capacitor to discharge before performing further
diagnosis or service. This is the only sure way to disable the supplemental restraint system. Failure to take the proper precautions could result
in accidental airbag deployment.
1. Disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to discharge before further service.
2. Remove the center bezel from the instrument panel.
3. From the back of the center bezel (1), depress the two latches (2) on the top and bottom of the indicator housing (3) and push the indicator out
through the face of the bezel.